UNI EN ISO 21920-2
Geometrical product specifications (GPS) — Surface texture: Profile – Part 2: Terms, definitions and surface texture parameters
|
UNI EN 10049
Measurement of roughness average Ra and peak count RPc on metallic flat products
|
ASTM D 4417-B
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
|
UNI EN ISO 8503-1
Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates – Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
UNI EN ISO 8503-2
Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates – Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel – Comparator procedure
|
UNI EN ISO 5436-1
Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards – Material measures
|
ASTM E 797
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
|
UNI EN 15317
Non-destructive testing – Ultrasonic testing – Characterization and verification of ultrasonic thickness measuring equipment
|
ASTM E 709
Standard Guide for Magnetic Particle Testing
|
ASTM E 1444
Standard Practice for Magnetic Particle
|
UNI EN ISO 3452-1
Non-destructive testing – Penetrant testing – Part 1: General principles
|
UNI EN ISO 9934-2
Non-destructive testing – Magnetic particle testing – Part 2: Detection media
|
UNI EN ISO 2746
Vitreous and porcelain enamels – High voltage test
|
UNI EN ISO 29601
Paints and varnishes – Corrosion protection by protective paint systems – Assessment of porosity in a dry film
|
ASTM C 536
Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
|
ASTM C 537
Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
|
ASTM D 5162-B
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates. High Voltage Spark Testers
|
ASTM D 5162-A
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates. Low Voltage Wet Sponge
|
ASTM G 62
Standard Test Methods for Holiday Detection in Pipeline Coatings
|
UNI EN ISO 8289
Vitreous and porcelain enamels – Low-voltage test for detecting and locating defects
|
UNI EN ISO 2178
Non-magnetic coatings on magnetic substrates – Measurement of coating thickness – Magnetic method
|
UNI EN ISO 2360
Non-conductive coatings on non-magnetic electrically conductive base metals – Measurement of coating thickness – Amplitude-sensitive eddy-current method
|
UNI EN ISO 2808
Paints and varnishes – Determination of film thickness
|
UNI EN ISO 1461
Hot dip galvanized coatings on fabricated iron and steel articles – Specifications and test methods
|
ISO 19840
Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
|
ISO 10074
Anodizing of aluminium and its alloys – Specification for hard anodic oxidation coatings on aluminium and its alloys
|
ASTM B 499
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
|
ASTM D 7091
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
|
ASTM E 376
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
|
UNI EN 13523-1
Coil coated metals – Test methods – Part 1: Film thickness
|
ASTM D 4138-A
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
|
ASTM D 5796
Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
|
ISO 2808-1A
Paints and varnishes – Determination of wet film thickness
|
ISO 2808-1B
Paints and varnishes – Determination of wet film thickness
|
ASTM D 4414-A
Standard Practice for Measurement of Wet Film Thickness
|
ASTM D 1212-A
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
|
UNI EN ISO 2409
Paints and varnishes – Cross-cut test
|
UNI EN ISO 16276-2
Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 2: Cross- cut testing and X-cut testing
|
ASTM D 3359-B
Standard Test Methods for Rating Adhesion by Tape Test
|
UNI EN ISO 16276-1
Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 1: Pull- off testing
|
UNI EN ISO 4624
Paints and varnishes – Pull-off test for adhesion
|
ASTM D 4541
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
|
ASTM D 7234
Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
|
UNI EN 12636
Products and systems for the protection and repair of concrete structures – Test methods – Determination of adhesion concrete to concrete
|
UNI EN 13144
Metallic and other inorganic coatings – Method for quantitative measurement of adhesion by tensile test
|
UNI EN 1542
Products and systems for the protection and repair of concrete structures – Test methods – Measurement of bond strength by pull-off
|
ISO 1519-2
Paints and varnishes – Bend test (cylindrical mandrel)
|
ASTM D 522-B
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings (cylindrical mandrel)
|
ASTM D 522-A
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings (conical mandrel)
|
UNI EN ISO 6860
Paints and varnishes – Bend test (conical mandrel)
|
UNI EN ISO 1520
Paints and varnishes – Cupping test
|
ASTM D 2794
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
|
UNI EN ISO 6272-2
Paints and varnishes – Rapid- deformation (impact resistance) tests – Part 2: Falling-weight test, small-area indenter
|
UNI EN ISO 6272-1
Paints and varnishes – Rapid-deformation (impact resistance) tests – Part 1: Falling-weight test, large-area indenter
|
ASTM D 5420
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
|
UNI EN 13523-5
Coil coated metals – Test methods – Part 5: Resistance to rapid deformation (impact test)
|
UNI EN ISO 2815
Paints and varnishes – Buchholz indentation test
|
UNI EN ISO 15184
Paints and varnishes – Determination of film hardness by pencil test
|
ASTM D 3363
Standard Test Method for Film Hardness by Pencil Test
|
UNI EN ISO 9934-3
Non-destructive testing – Magnetic particle testing – Part 3: Equipment
|
UNI EN 13523-4
Coil coated metals – Test methods – Part 4: Pencil hardness
|
ISO 1522
Paints and varnishes — Pendulum damping test
|
ASTM D 4366
Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
|
UNI EN ISO 1518-1
Paints and varnishes – Determination of scratch resistance – Part 1: Constant-loading method
|
UNI EN ISO 1518-2
Paints and varnishes – Determination of scratch resistance – Part 2: Variable-loading method
|
UNI EN 13523-12
Coil coated metals – Test methods – Part 12: Resistance to scratching
|
ISO 12137
Paints and varnishes – Determination of mar resistance
|
ASTM D 2197
Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
|
ASTM D 5178
Standard Test Method for Mar Resistance of Organic Coatings
|
ASTM D 4752
Standard Practice for Measuring MEK Resistance
|
UNI EN ISO 11998
Paints and varnishes – Determination of wet-scrub resistance and cleanability of coatings
|
ASTM D 2486
Standard Test Methods for Scrub Resistance of Wall Paints
|
ASTM D 3450
Standard Test Method for Washability Properties of Interior Architectural Coatings
|
ASTM D 4213
Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
|
ASTM D 4828
Standard Test Methods for Practical Washability of Organic Coatings
|
ASTM D 5402
Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
|
ASTM C 1353
Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
|
ASTM C 217
Standard Test Methods for Weather Resistance of Slate
|
ASTM C 241
Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
|
ASTM C 501
Standard test method for relative resistance to wear of unglazed ceramic tile by the Taber abraser
|
ASTM D 1044
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
|
ASTM D 3389
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
|
ASTM D 3884
Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
|
ASTM D 4060
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
|
ASTM D 6037
Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
|
ASTM D 7255
Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
|
ASTM F 1478
Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
|
ASTM F 1978
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
|
ASTM F 362
Standard Test Method for Determining the Erasability of Inked Ribbons
|
ASTM F 510
Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
|
ISO 24338
Laminate floor coverings — Determination of abrasion resistance
|
ISO 4586-2
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates)
|
UNI EN ISO 5470-1
Rubber- or plastics-coated fabrics – Determination of abrasion resistance – Part 1: Taber abrader
|
ISO 7784-1
Paints and varnishes – Determination of resistance to abrasion – Part 1: Method with abrasive-paper covered wheels and rotating test specimen
|
ISO 9352
Plastics – Determination of resistance to wear by abrasive wheels
|
UNI EN 13329
Laminate floor coverings – Specifications, requirements and test methods
|
UNI EN 13523-16
Coil coated metals – Test methods – Part 16: Resistance to abrasion
|
UNI EN 14323
Wood-based panels – Melamine faced boards for interior uses – Test methods
|
UNI EN 14354
Wood-based panels – Wood veneer floor coverings
|
UNI EN 14688
Sanitary appliances – Wash basins – Functional requirements and test methods
|
UNI EN 1504-2
Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 2: Surface protection systems for concrete
|
UNI EN 438-2
High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 2: Determination of properties
|
UNI EN 660-2
Resilient floor coverings – Determintion of wear resistance – Frick-Taber test
|
EN 13696
Wood flooring – Test methods to determine elasticity and resistance to wear and impact resistance
|
UNI EN 13523-11
Coil coated metals – Test methods – Part 11: Resistance to solvents (rubbing test)
|
ASTM D 5264
Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
|
ISO 1524
Paints, varnishes and printing inks — Determination of fineness of grind
|
ASTM D 1210
Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
|
ASTM D 1316
Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
|
ASTM D 1200
Standard Test Method for Viscosity by Ford Viscosity Cup
|
ASTM D 333
Standard Guide for Clear and Pigmented Lacquers
|
ASTM D 365
Standard Guide for Soluble Nitrocellulose Base Solutions
|
ISO 2431
Paints and varnishes – Determination of flow time by use of flow cups
|
ASTM D 5125
Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
|
ASTM D 1084-D
Standard Test Methods for Viscosity of Adhesives
|
ASTM D 4212
Standard Test Method for Viscosity by Dip-Type Viscosity Cups
|
UNI EN ISO 2811-1
Paints and varnishes – Determination of density – Part 1: Pycnometer method
|
ASTM D 891-B
Standard Test Methods for Specific Gravity
|
ASTM D 1475
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
|
ISO 2555
Plastics – Resins in the liquid state or as emulsions or dispersions – Determination of apparent viscosity using a single cylinder type rotational viscometer method
|
ASTM D 1084-B
Standard Test Methods for Viscosity of Adhesives
|
ASTM D 2196
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
|
ASTM D 562
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
|
ASTM D 1084-C
Standard Test Methods for Viscosity of Adhesives
|
UNI EN ISO 9117-4
Paints and varnishes – Drying tests – Part 4: Test using a mechanical recorder
|
ASTM D 5895
Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
|
EN ISO 10364
Structural adhesives – Determination of the pot life (working life) of multi-component adhesive
|
ASTM D 823-E
Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
|
ASTM D 4147
Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars
|
ASTM D 823-C
Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
|
UNI EN ISO/CIE 11664-1
Colorimetry – Part 1: CIE standard colorimetric observers
|
UNI EN ISO/CIE 11664-2
Colorimetry – Part 2: CIE standard illuminants
|
UNI EN ISO/CIE 11664-3
Colorimetry – Part 3: CIE tristimulus values
|
UNI EN ISO/CIE 11664-4
Colorimetry – Part 4: CIE 1976 L*a*b* colour space
|
UNI EN ISO/CIE 11664-5
Colorimetry – Part 5: CIE 1976 L*u*v* colour space and u’, v’ uniform chromaticity scale diagram
|
UNI ISO 2469
Paper, board and pulps – Measurement of diffuse radiance factor (diffuse reflectance factor)
|
ASTM C 609
Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
|
ASTM D 2244
Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
|
ASTM E 308
Standard Practice for Computing the Colors of Objects by Using the CIE System
|
ASTM E 313
Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
|
ASTM E 1164
Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
|
ISO 6719
Anodizing of aluminium and its alloys – Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
|
UNI EN 13523-3
Coil coated metals – Test methods – Part 3: Colour difference and metamerism – Instrumental comparison
|
ISO 3668
Paints and varnishes – Visual comparison of colour of paints
|
ISO 3664
Graphic technology and photography — Viewing conditions
|
ASTM D 1729
Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
|
ASTM D 4086
Standard Practice for Visual Evaluation of Metamerism
|
UNI EN ISO 2813
Paints and varnishes – Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
|
UNI EN ISO 7668
Anodizing of aluminium and its alloys – Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°
|
ASTM C 584
Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
|
ASTM D 523
Standard Test Method for Specular Gloss
|
ASTM D 1455
Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
|
ASTM D 2457
Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
|
ASTM D 4449
Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
|
UNI EN 13523-2
Coil coated metals – Test methods – Part 2: Gloss
|
UNI EN ISO 8254-1
Paper and board – Measurement of specular gloss – Part 1: 75 degree gloss with a converging beam, TAPPI method
|
UNI ISO 2470-2
Paper, board and pulps – Measurement of diffuse blue reflectance factor – Part 2: Outdoor daylight conditions (D65 brightness)
|
ISO 2471
Paper and board – Determination of opacity (paper backing) – Diffuse reflectance method
|
UNI ISO 2469
Paper, board and pulps – Measurement of diffuse radiance factor (diffuse reflectance factor)
|
UNI EN ISO 6504-3
Paints and varnishes – Determination of hiding power – Part 3: Determination of hiding power of paints for masonry, concrete and interior use
|
UNI ISO 11228-2
Ergonomics – Manual handling – Part 2: Pushing and pulling
|
UNI EN 179
Building hardware – Emergency exit devices operated by a lever handle or push pad, for use on escape routes – Requirements and test methods
|
UNI EN 12217
Doors – Operating forces – Requirements and classification
|
UNI EN 1154
Building hardware – Controlled door closing devices – Requirements and test method
|
UNI EN 12453
Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Requirements and test methods
|
UNI EN 15886
Conservation of cultural property – Test methods – Colour measurement of surfaces
|
UNI EN ISO 16859-1
Metallic materials – Leeb hardness test – Part 1: Test method
|
ASTM A 956
Standard Test Method for Leeb Hardness Testing of Steel Products
|
ASTM E 140
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
|
ASTM A 1038
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
|
DIN 50159-1
Metallic materials – Hardness testing with the UCI method – Part 1: Test method
|
ASTM B 647
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
|
ASTM B 648
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
|
ASTM D 2583
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
|
UNI EN ISO 6507-1
Metallic materials – Vickers hardness test – Part 1: Test method
|
UNI EN ISO 4545-1
Metallic materials – Knoop hardness test – Part 1: Test method
|
ASTM E 92
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
|
ASTM E 384
Standard Test Method for Microindentation Hardness of Materials
|
UNI EN ISO 6508-1
Metallic materials – Rockwell hardness test – Part 1: Test method
|
ASTM E 18
Standard Test Methods for Rockwell Hardness of Metallic Materials
|
UNI EN ISO 6506-1
Metallic materials – Brinell hardness test – Part 1: Test method
|
UNI EN ISO 6507-1
Metallic materials – Vickers hardness test – Part 1: Test method
|
ASTM E 10
Standard Test Method for Brinell Hardness of Metallic Materials
|
UNI EN ISO 868
Plastics and ebonite – Determination of indentation hardness by means of a durometer (Shore hardness)
|
UNI ISO 48-4
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
|
UNI ISO 48-7
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
|
ASTM D 2240
Standard Test Method for Rubber Property—Durometer Hardness
|
ISO 2954
Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
|
UNI EN ISO 8502-4
Preparation of steel substrates before application of paint and related products – Tests for the assessment of surface cleanliness – Guidance on the estimation of the probability of condensation prior to paint application
|
2014/33/UE
Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to lifts and safety components for lifts Text with EEA relevance
|
ISO 2115
Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature
|
ASTM D 2354
Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
|
UNI EN ISO 4611
Plastics – Determination of the effects of exposure to damp heat, water spray and salt mist
|
UNI EN ISO 9227
Corrosion tests in artificial atmospheres – Salt spray tests</a
|
UNI EN 13523-8
Coil coated metals – Test methods – Part 8: Resistance to salt spray (fog)
|
ASTM B 117
Standard Practice for Operating Salt Spray (Fog) Apparatus
|
ASTM B 368
Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
|
ASTM B 380
Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
|
ASTM G 85
Standard Practice for Modified Salt Spray (Fog) Testing
|
ASTM D 1735
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
|
ISO 16474-3
Paints and varnishes – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps
|
UNI EN ISO 4892-1
Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance
|
UNI EN ISO 4892-3
Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps
|
ASTM D 4587
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
|
ASTM D 4329
Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
|
ASTM G 151
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
|
ASTM G 154
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
|
ISO 12040
Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light
|
ASTM D 3451
Standard Guide for Testing Coating Powders and Powder Coatings
|
ASTM D 3794
Standard Guide for Testing Coil Coatings
|
ASTM D 4303
Standard Test Methods for Lightfastness of Colorants Used in Artists’ Materials
|
ASTM D 6577
Standard Guide for Testing Industrial Protective Coatings
|
UNI EN 14624
Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
|
|
