Through coating ultrasonic thickness gauges - SAUT500D-SW
With a large coloured backlit graphic display with automatic adjustment of main parameters, this UT thickness gauge is able to operate in "Through Coating" mode to measure sample thickness excluding the coating over metallic substrates.
Several functions as A / B scan and fine adjustment of signal parameters rounds off this gauge, designed for professional use.
|
Modello / Model |
SAUT500D-SW |
|
|
Standard |
ASTM E 797 : EN 15317 |
|
|
Campo di misura strumento Instrument measuring range |
I-E Standard |
0,60 ~ 500 mm ( ref. steel ) |
|
E-E Attraverso vernici / Through coating |
3 ~ 50 mm [ coating < 8 mm ] |
|
|
Sonda standard / Standard probe |
SAPT-510 ( 5 Mhz ) |
|
|
Risoluzione / Resolution |
0,01 mm |
|
|
Precisione / Accuracy |
± 0,05 mm [ ≤ 25 mm ] ± 0,2% H [ < 100 mm ] ± 0,5% H [ > 100 mm ] |
|
|
Velocità di propagazione del suono nel materiale Sound velocity range |
500 ~ 9999 m/s |
|
|
Unità di misura / Measuring units |
mm ; inch |
|
|
Frequenza di lettura / Update rate |
Selectable: 4Hz , 8Hz , 16Hz |
|
|
Rettifica segnale / Rectify modes |
RF+ , RF- , Half+ , Half- , Full wave |
|
|
Correzione V-path / V-path correction |
Automatic |
|
|
Modalità di visualizzazione / Display mode |
Normal (thickness, min/max capture, difference/rate-of-reduction %) ; A-scan ; B-scan |
|
|
Funzione di allarme / Alarm function |
Minimum and Maximum alarms Dynamic waveform color change on alarm |
|
|
Calibrazioni / Calibration modes |
1 point or 2 points |
|
|
Memoria interna / Internal memory |
100.000 thickness values and 1.000 waveforms |
|
|
Uscita dati / Data output |
√ |
|
|
Indicatore batterie scariche / Low battery indicator |
√ |
|
|
Autospegnimento / Auto switch off |
√ |
|
|
Alimentazione / Power supply |
2x 1,5 V AA |
|
|
Dimensioni / Dimensions |
153 x 76 x 37 mm |
|
|
Peso / Weight |
280 g |
|
|
SAUT500D-SW - Scheda tecnica sonde / Probes data sheet |
|||||
|
Modello / Model |
Freq. Mhz |
Φ est/contatto Φ ext/contact |
Campo di misura (acciaio) Measuring range (steel) |
Φ Min. misurabile Φ Min.measurable |
Impiego / Usage |
|
SAPT-04 |
10 |
6 / 4 mm |
0,7 ~ 12 mm |
12 x 2,0 mm |
Mini-probe |
|
SAPT-705 |
10 |
7 / 5 mm |
0,6 ~ 80 mm |
13 x 2,0 mm |
High frequency probe |
|
SAPT-06 |
7,5 |
9 / 6 mm |
0,8 ~ 30 mm |
15 x 2,0 mm |
Small probe |
|
SAPT-08 |
5 |
11 / 8 mm |
0,8 ~ 100 mm |
20 x 3,0 mm |
Normal probe |
|
SAPT-510 |
5 |
13,5 / 10 mm |
0,8 ~ 275 mm |
20 x 3,0 mm |
Standard probe Through-coating |
|
SAPT-12 |
5 |
13 / 10 mm |
1,0 ~ 150 mm |
20 x 3,0 mm |
Normal probe |
|
SAPT-13 |
5 |
15 / 10 mm |
4,0 ~ 80 mm |
20 x 3,0 mm |
High temperature probe (≤380°C) |
|
SAPT-16 |
2 |
17 / 12 mm |
4,0 ~ 500 mm |
30 x 3,0 mm |
Low frequency probe |
Dotazione Standard / Standard Supply:
Unità centrale / Main unit
Sonda standard / Standard probe
Gel di accoppiamento 50 ml / 50 ml couplant gel
Cavo e software / Cable and software
Valigetta / Carrying case
Manuale d’uso / User’s manual
Accessori Opzionali / Optional Accessories:
Sonde opzionali / Optional probes
Master di calibrazione 6 step / 6 steps calibration block
Gel 50ml-260ml-1lt-5lt / 50ml-260ml-1lt-5lt couplant gel
Certificato di taratura / Calibration report
