Digital Vibrometer

Digital Vibrometer

Digital Vibration Meter Mono-axial - SA6360 

Small dimensions, is equipped with a wide LCD for direct visualization of measure and infos.

Characteristics :

  • Is periodically used on balance and alignment tests on machines with rotating parts
  • Designed to be simple to use allow rapid and reliable quality controls and tests on machinery
  • High quality accelerometer
  • Monitoring function for bearing status
  • Large measuring range (10Hz - 10kHz) in acceleration mode
  • Digital display foraccurate results reading
  • Automatic power off
  • Headphone outputs
  • Optional headphones for electronic stethoscope use
  • USB interface (software optional).

Technical specifications :

  • Display:LCD
  • Transducer
  • Piezoelectric
  • Accelerometer
  • Measurements: speed, acceleration, displacement, RPM and frequency;
  • Measuring range: Speed​​: 0.01 to 40.00cm/s
  • Acceleration:0.1 to 400.0m/s2 equivalentpeak
  • Displacement:0.001 to 4.000mm
  • RPM: 60-99990 r/min
  • Frequency: 1-20 kHz

FrequencyRanges :

  • Acceleration: 10Hz-1kHz mode "1" or 10Hz-10kHz-mode "10"
  • Speed​​: 10Hz-1Khz;
  • Displacement:10Hz-1kHz;
  • Accuracy: ±5% n +2 digits; Decimal/Inch conversion;
  • PC interface: USB; Power supply: AAA4x1.5V;
  • Shutdown: Manualand Automatic;
  • Condition of use: Temperature: 0-50 °C; Humidity: <90% RH;
  • Dimensions: 124x62x30mm;
  • Weight: about 120g without batteries.

Which parameters can be measured? Acceleration ,speed and displacement are the three measurable parameters which guarantee accurate and repeatable measurement. Acceleration: measured in m/s², has excellent measurement capacities to verify faults on bearings and gears; Velocity: the parametermostused to measure vibrations, used for verification according to ISO 2372, BS 4675 or VDI 2056 (paragraph 7 for more informations). The units of measure is cm/s (centimetres per second), but is possible to convert it in mm/s (millimeters per second) multiplying the value on the display X10.

Displacement: Usually used for measurement on low speed machinery for his good response to low frequency, becomes ineffective for bearings measurement.Makemeasurementsin mmon peaks. Some example of use: Mechanical resistance, usury, duration of the various machinery organs; Safety of a proper operation that could be affected by excessive vibration (loosening of clampings, displacementof windingsinelectric machines ecc.) Repercussion of vibrations of a machinery part on other (bearings, gears, couplings, base plates, foundation, etc..) and on near machines. Quality of work produced by machinery (machine tools, textiles, paper, rolling mill) Quality of workplace and of maintenance operations on machinery.

Conform to ISO2954,GB13823.3 standard

Model

SA6360

Acceleration (peak value)

Bandpass filter

10Hz - 1Khz

0.1~400 m/s²

10Hz - 10Khz

RMS velocity

10Hz - 1Khz

0.1~400 mm/s

Displacement

10Hz - 1Khz

0.001~4.0 mm

RPM

60~99990 r/min

Frequency

da 1 a 20 KHz

Accuracy

±5%+2

Metric-Imperial

Yes

Output setting

AC 2V

(Full scale peak)

Data output

PC interface

Earphone output

Operating condition

0~50 °C ≤90%RH

Power supply

4x1.5V AAA (UM4)

Battery indicator

Si / Yes

Dimensions

124x62x30 mm

Weight (without batteries)

120g

Standard supply

Main unit

Carrying case

Powerful rare earth magnet

Piezoelectricity 3-axis transducer

2 Stinger probe

Manual

Optional accessories

Cable and software

Certificate


Add to cart Search