TENSILE TESTING DEVICE - SAHDV-30K-S
The new tensile test machine by SAMA Tools is conceived for mechanical breaking tensile tests of blind rivets (both flat and sunken-headed ones) with diameters up to 6,4mm according to the UNI EN ISO 14589.
The test consists in deforming a blind rivet installed in a special test equipment up to the breaking point.
As defined by the international standard, the test methods that can be performed are:
- Shear test of blind rivets
- Tensile test of blind rivets
- Rivet shaft breaking force
Shear test of blind rivets
The test is performed by installing the rivet on a pair of bushes. These bushes will be housed on a special pair of self-aligning grips.
Tensile test of blind rivets
The test is performed by installing the rivet on a pair of bushes. These bushes will be housed on a special pair of grips.
Rivet shaft breaking force
The test is performed by installing the rivet on a bush. This bush will be housed on a special grip and tightened by the underlying clamp.
The bush, the grips and the clamp will be assembled in such a way as to constitute a riveted whole (depending on the test that the user wants to run). The operator proceeds by performing a continuous traction of the rivet, with a test speed between 7-13 mm/min until its complete rupture.
If the rivet or the shaft should break before the specified minimum load is reached, the test should be considered failed and therefore not compliant.
Contact us for more information and to receive a free quotation.
If required, our technicians will support you during the machine installation and will be able to train operators for use, directly in your company.