Roughness surface tester for sandblasting - SA6223
The Digital Profile Tester is an instrument projected for the fast and accurated measurement of the roughness about sandblasted surfaces. The instrument measures the distance from the peak and the valley on the surface after sandblasting it. If the peak is high the quantity of the paint must be more otherwise there will be the risk that the peaks will remain unpainted allowing the formation of rust.
If the peak is too low may cause poor adhesion of the paint to the surface so as to cause the early loss of patent coverage. The instrument allows to ensure the proper preparation of a surface to be painted to optimize painting operations and therefore labor costs. These types of roughness, due to the robustness, high precision and reliability, are suitable for use in laboratory and in harsh environments.
|
Modello / Model |
SA6223 |
|
Standard |
ASTM D 4417-B ; IMO MSC.215(82) ; SANS 5772 US Navy NSI 009-32 ; US Navy PPI 63101-000 |
|
Campo di misura / Measuring range |
0 ~ 800 µm |
|
Risoluzione / Resolution |
0,1 µm [ ≤ 99,9 µm ] 1 µm [ > 100 µm ] |
|
Precisione / Accuracy |
± 5% or ± 5 µm |
|
Unità di misura / Measuring units |
µm ; mil |
|
Velocità di misurazione / Measurement speed |
> 30 readings per minute |
|
Modalità di misura / Measurement mode |
Single ; Average |
|
Uscita dati / Data output |
√ |
|
Auto spegnimento / Auto switch-off |
√ |
|
Alimentazione / Power supply |
AAA batteries |
|
Dimensioni / Dimensions |
162 x 65 x 28 mm |
|
Peso / Weight |
280 g |
Dotazione Standard / Standard Supply:
Unità centrale / Main unit
Provino di calibrazione / Calibration block
Valigetta / Carrying case
Manuale d’uso / User’s manual
Accessori Opzionali / Optional Accessories:
Cavo e software / Cable and software
Certificato di taratura / Calibration report
