Ultrasonic flaw detector - SAFD500
Highly specialized device used to inspect pipelines, rail tracks and industry related metallic works in order to highlight possible flaws like discontinuities, non-metallic inclusions, cracks or various defects due to wearing or production process.
Ultrasonic flaw detectors represent the most advanced edge for maintenance and quality control.
|
Funzioni / Features |
Description |
|
Modalità rilevazione / Test Modes |
Straight, Angle, Dual and Thru-transmission |
|
Calibrazione automatica / Auto-calibration |
Automated calibration of transducer zero offset and/or material velocity |
|
Localizzazione difetto / Flaw locating |
Live display Sound-path, Projection (surface distance), Depth, Amplitude |
|
Dimensionamento difetto / Flaw sizing |
Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection. |
|
DAC / AVG |
√ |
|
AWS (American Welding Society) standards |
D1.1 |
|
Correzione superfici curve Curved surface correction |
Used to measure the surface distance and depth of defect on a curved surface |
|
Misurazione dell’altezza della cricca Crack height measuring |
Measure and display the height of a crack found inside the workpiece |
|
Analisi saldatura / Weld figure feature |
Weld Figure feature can be enabled when detecting the weld parts using angle transducer |
|
Ingrandimento del gate / Magnify gate |
Spreading of the gate range over the entire screen width |
|
Videoregistrazione / Video recording |
2 minutes |
|
Guadagno automatico / Auto-gain |
√ |
|
Peak Hold |
Compare frozen peak waveform to live A-Scans to easily interpret test results |
|
Fermo immagine A Scan / A Scan freeze |
Display freeze holds waveform and sound path data |
|
B-Scan |
Display a graphical cross-section of the workpiece |
|
Modello / Model |
SAFD500 |
|
Standard |
EN 12668-1 ; ASTM E 317 |
|
Campo di misura / Measuring range |
0 ~ 6.000 mm ( ref. steel ) |
|
Velocità del suono / Material velocity |
300 ~ 15.000 m/s |
|
Ritardo display / Display delay |
-20 ~ 3.400 µs |
|
Compensazione ritardo/zero sonda Probe delay/zero offset |
0 ~ 99,99 µs |
|
Campo dinamico / Dynamic range |
≥ 36 dB |
|
Deviazione lineare / System linearity |
Horizontal ≤ 0,1% FSW ; Vertical ≤ 0,25% FSH ; Amplifier Accuracy ± 1 dB |
|
Risoluzione / Resolution |
> 40 dB (5P14) |
|
Sensibilità / Sensitivity leavings |
60 dB ( flat-bottomed deep hole 200 mm Ф2 ) |
|
Scarto / Rejection |
0 ~ 80% full screen height |
|
Livello rumore / Noise level |
≤ 8% |
|
Pulsazioni / Pulse energy |
Low ( 300 V ), Medium ( 500 V ), High ( 700 V ) |
|
Ampiezza pulsazioni / Pulse width |
-- |
|
Frequenza pulsazioni Pulse repetition frequency range |
10 ~ 1.000 Hz |
|
Smorzamento / Probe damping |
100 Ω, 200 Ω and 400 Ω for optimum probe performance |
|
Campionamento / Sampling |
10 digits AD Converter at the sampling speed of 160 MHz |
|
Raddrizzamento / Rectification |
Positive half wave, Negative half wave, Full wave, RF |
|
Larghezza banda / Bandwidth |
0,5 ~ 15 MHz automatic matching according to the probe frequency |
|
Guadagno / Gain |
0 ~ 110 dB adjustable in selectable steps 0,1 / 1 / 2 / 6 dB |
|
Gates |
Gate A and B |
|
Monitoraggio gate / Gate monitors |
Two independent gates controllable over entire sweep range |
|
Calibrazione automatica / Auto-calibration |
Automated calibration of transducer zero offset and/or material velocity |
|
Unità di misura / Measuring units |
Inch or millimeter |
|
Allarme / Alarm |
Beep alarm and LED light Alarm |
|
Connettori trasduttore / Transducer Connections |
BNC or LEMO |
|
Tipo sonda / Probe type |
Straight beam probe, angle beam probe, dual element probe, through-transmit probe |
|
Interfaccia di comunicazione Communication interface |
High Speed USB2.0 port |
|
Memoria / Memory |
100 channel files to store calibration set-ups 10.000 wave files to store A-Scan patterns and instrument settings |
|
Alimentazione / Power supply |
Rechargeable battery |
|
Dimensioni / Dimensions |
263 x 170 x 61 mm |
|
Peso / Weight |
1,2 Kg |
Dotazione Standard / Standard Supply:
Unità centrale / Main unit
Sonda dritta (4MHz, Ø10) / Straight beam probe (4 MHz, Ø10)
Sonda angolata (4 MHz, 8×9 mm, 60°) / Angle beam probe (4 MHz, 8×9 mm, 60°)
Cavo sonda / Probe cable
Cavo e software / Cable and software
Valigetta / Carrying case
Manuale d’uso / User’s manual
Accessori Opzionali / Optional Accessories:
Sonde opzionali / Optional probes
Custodia protettiva per unità principale / Protective cover for main unit
Cavi sonda / Probe cables
Blocchi di calibrazione / Calibration blocks
Gel 50ml-260ml-1lt-5lt / 50ml-260ml-1lt-5lt couplant gel
Certificato di taratura / Calibration report
