The IP67 digital depth caliper for small holes and grooves with data output is a measuring instrument designed for workshop and quality control applications where reliable measurement of the depth of small diameter holes, grooves and slots is required.
The geometry of the measuring tip is specifically designed to operate on small dimension holes, allowing access even inside cavities that are difficult to reach. Depth calipers for small holes are particularly suitable for applications where standard instruments would be too bulky.
A distinctive feature of this model is the possibility of using it also for groove measurement, performing inspections both in pull and push mode. This dual measuring capability allows better adaptation to the geometry of the workpiece, improving contact and stability during measurement compared to traditional calipers.
It guarantees high measurement stability and operational continuity even during intensive use. The IP67 protection ensures resistance against dust and liquids, making the instrument suitable also for harsh industrial environments.
Manufactured in stainless steel, it guarantees robustness and long-term stability even during continuous use. The LCD digital display provides clear and immediate reading of values.
The 0.01 mm resolution, mm/inch conversion and Preset function allow fast and accurate measurements, improving dimensional inspection management.
The presence of the data output allows connection to software for measurement collection, improving traceability and reducing transcription errors in quality control processes.
Thanks to the combination of reduced contact geometry and IP67 protection, this caliper is particularly suitable for applications where depth measurements on small holes and grooves must be carried out with one single instrument, maintaining reliability and operational versatility.
Applications
- Depth measurement of small holes
- Groove inspections in pull and push mode
- Dimensional inspections on small diameter cavities
- Connection to software for data collection
FAQ – IP67 digital depth caliper for small holes
When should a depth caliper for small holes be selected?
When the dimension to be checked is located inside small diameter holes or cavities where a standard depth caliper would not fit.
What is the purpose of the measuring tip for small holes?
It allows access to restricted measuring areas, making it possible to inspect dimensions that would be difficult or impossible to verify with standard instruments.
What is the advantage compared to a traditional depth caliper?
It allows operation in very limited spaces with a more suitable contact geometry, improving inspection consistency on small holes and narrow cavities.
Can it be used only for holes?
No, this model can also be used for groove inspections, operating both in pull and push mode.
Why is the pull and push measuring capability useful?
Because it allows the inspection method to adapt to the groove geometry, improving contact stability during measurement.
On which types of components is it most commonly used?
It is commonly used on small holes, grooves, slots and reduced diameter cavities where a more compact and specific instrument is required.
Why is IP67 protection important on this model?
Because it allows the instrument to be used even in environments with dust and liquids while maintaining operational continuity in production.
When is the Preset function useful?
It is useful during repetitive inspections or when a reference value must be set to speed up the verification process.
When is the data output useful?
When measurements must be transferred to measurement collection software, especially in processes where traceability is important.
For which inspections is it most commonly selected?
For depth inspections on small holes, verification on narrow cavities and groove inspections in pull and push mode.
Can it be a good choice for quality control?
Yes, especially when the quality department must inspect small dimensions using a dedicated instrument more suitable than standard models.
In which industrial environments is it most commonly used?
It is widely used in mechanical workshops, quality control and production where components feature small holes or grooves difficult to inspect.
Why choose this model instead of a traditional depth caliper?
Because it combines accessibility for small diameters, groove inspection capability and IP67 protection, offering greater versatility in real industrial applications.
Fill out the form below to contact us.
"*" indicates required fields
