IAQ analysis datalogger – HD37AB1347

IAQ analysis datalogger – HD37AB1347

The IAQ analysis datalogger is a portable instrument designed for monitoring indoor air quality, developed for environmental and comfort parameter monitoring in schools, offices, production areas, public buildings, technical rooms and occupied indoor spaces.

The instrument operates in combination with the P37AB147 combined probe, allowing simultaneous measurement of carbon dioxide CO2, carbon monoxide CO, temperature, relative humidity and atmospheric pressure. Based on the acquired values, the datalogger also calculates dew point, wet bulb temperature, absolute humidity, mixing ratio and enthalpy, providing a more complete evaluation of indoor thermohygrometric conditions.

An important feature of the instrument is the possibility to connect additional probes with SICRAM module, extending measurement capability beyond standard IAQ analysis. Dedicated indoor air quality inputs can be used with probes such as P37AB147, P37B147, temperature and humidity combined probes. Through the Temp-Air Velocity input, it is also possible to connect hot-wire air velocity probes, vane air velocity probes and SICRAM temperature probes.

With the dedicated procedure, the instrument can calculate the percentage of outdoor air introduced into the environment (% Outside Air), based on CO2 concentration and temperature, as well as the Ventilation Rate. This function is particularly useful when evaluating air exchange efficiency and ventilation system behaviour in relation to room occupancy.

The datalogger memory is divided into 64 blocks, with capacity for 67,600 recordings for each of the two inputs. Logging interval can be selected between 15 seconds, 30 seconds, 1, 2, 5, 10, 15, 20, 30 minutes and 1 hour, making the instrument suitable both for short monitoring activities and long-term measurement campaigns.

The backlit graphic display with 160 x 160 point resolution provides clear visualization of acquired data. Data transfer can be performed through miniUSB port or RS232C interface with M12 connector, which can also be used for connection to compatible portable printers.

Reference standards indicated for this instrument include ASHRAE 62.1-2004 and Italian Legislative Decree 81/2008. These references concern occupied indoor spaces and require evaluation of indoor air quality, chemical, physical and biological contaminants, as well as possible outdoor air introduced without adequate purification.

The datalogger is suitable for IAQ analysis, HVAC system efficiency verification, sick building syndrome investigations and building automation controls. IP65 protection rating, battery power supply and up to 20 hours autonomy with P37AB147 probe connected make it suitable also for field measurements and operational inspections.

Applications

  • Indoor air quality analysis in schools, offices, production areas and occupied spaces
  • Simultaneous measurement of CO2, CO, temperature, relative humidity and atmospheric pressure with combined probe
  • Calculation of dew point, wet bulb temperature, absolute humidity, mixing ratio and enthalpy
  • Evaluation of outdoor air percentage and ventilation rate
  • Verification of HVAC, ventilation and air conditioning system efficiency
  • Investigation of sick building syndrome and indoor comfort conditions
  • Air velocity measurements with hot-wire or vane probes connected to the instrument
  • IAQ monitoring with internal memory and configurable logging intervals
  • Building automation inspections and indoor environmental control

FAQ – IAQ analysis datalogger

What is the IAQ analysis datalogger used for?
It is used to measure and record the main indoor air quality parameters, including CO2, CO, temperature, relative humidity and atmospheric pressure, using the dedicated combined probe.

Which parameters are measured with the P37AB147 combined probe?
With the P37AB147 probe, the instrument measures carbon dioxide CO2, carbon monoxide CO, relative humidity, temperature and atmospheric pressure.

Which calculated parameters are available?
The datalogger calculates dew point, wet bulb temperature, absolute humidity, mixing ratio and enthalpy. Through dedicated procedures it can also calculate outdoor air percentage and ventilation rate.

What is the difference between P37AB147 and P37B147?
The P37AB147 probe also measures carbon monoxide CO. The P37B147 probe measures CO2, relative humidity, temperature and atmospheric pressure, but does not include CO measurement.

Can additional probes be connected besides the IAQ probe?
Yes, the instrument can also operate with SICRAM temperature probes, combined temperature/humidity probes, hot-wire air velocity probes and vane air velocity probes.

How much data can the instrument store?
The memory is divided into 64 blocks and allows 67,600 recordings for each of the two inputs.

Which logging intervals are available?
Selectable intervals include 15 and 30 seconds, or 1, 2, 5, 10, 15, 20, 30 minutes and 1 hour.

Can data be transferred to a PC?
Yes, data transfer can be performed through miniUSB port. HID-type USB connection allows PC communication without requiring dedicated USB drivers.

Can data be printed directly?
Yes, through the RS232C interface with M12 connector it is possible to connect a compatible portable printer using the dedicated cable.

Which reference standards are indicated?
Technical documentation refers to ASHRAE 62.1-2004 and Italian Legislative Decree 81/2008 as references for indoor air quality analysis in occupied indoor environments.

Are probes included with the instrument?
No, probes and cables must be selected and ordered separately. This allows the instrument to be configured according to the real application requirements.

Fill out the form below to contact us.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name and Surname*
IMPORTANT: the request for a quote from Italy is valid only for VAT holders.
For example, indicate the measurement range, product code, application of interest, quantity, etc.
Are you also interested in instrument calibration?*
Are you also interested in the training course on the instrument?*
Sending communications for purposes related to direct marketing activities (sending offers, training, information and promotional material by e-mail, fax, telephone, whatsapp, SMS, traditional mail, social networks etc.

You may also be interested in

Request promotion

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name and Surname*
IMPORTANT: the request for a quote from Italy is valid only for VAT holders.
Sending communications for purposes related to direct marketing activities (sending offers, training, information and promotional material by e-mail, fax, telephone, whatsapp, SMS, traditional mail, social networks etc.